background image

Additional Information

7-15

12

Replace the failed adapter with a known working adapter. 
If the second adapter fails, something is probably wrong 
with the test environment, not the adapter.

Additional Information

Troubleshooting help can be found in three other locations. 
They are as follows:

Error messages

On-line information

Technical Support appendix

Error Messages

Refer to Appendix C, “Error Messages,” for a list of error 
messages that may appear when using the 

TokenDisk

 diskette 

Configuration and Diagnostic Program for the 3C619C adapter.

On-line Information

The [F1] key activates help information at any time during 
operation of the 

TokenDisk

 diskette Configuration and 

Diagnostic Program. In addition, the Configuration/ 
Diagnostic/Troubleshooting selection on the main menu 
contains information about the following topics:

Commonly used interrupts and I/O base addresses

Technical support

Technical Support

For any problems not discussed in this chapter, refer to 
Appendix D, “Technical Support,” for information on 3Com’s 
on-line technical services. 3ComFacts

SM

 provides technical 

tips and product information. Ask3Com

SM

 and the 3Com 

Bulletin Board Service (3ComBBS) provide 

TokenDisk

 diskette 

software updates, drivers, technical tips, and product 
information. 

Summary of Contents for 09-0572-000






































































































Reviews: