manualshive.com logo in svg

3Com 005699-00 -, Manual, Page: 5 / 101

Share
Download
3Com 005699-00 - Manual Download Page 5

S

OFTWARE 

I

NSTALLATION

2-1

Windows-based Systems:

Running the Setup Wizard

The instructions for installing your

Connections

™

 CD-ROM software are on

the installation map included in your
modem’s box. If you have not completed
this portion of your install, you should do so
now.

Using Connections Software

Once installation is complete, you can use
the 

Connections

 CD at any time by

following these steps:

•

 

Insert the 

Connections

 CD into your

CD-ROM drive.

•

 

If the CD is already in your drive, take
it out and reinsert it.

•

 

If you have disabled AutoPlay, click

Start

, point to 

Programs

, point to

3Com U.S. Robotics

, and click

Connections

.

Installing the RapidComm

™

Software

 

NOTE:

 

If you have an older

version of RapidComm software on your
system, uninstall it before continuing.
To start the uninstall, double-click the
Add/Remove Programs  icon in the
Control Panel. This will erase any faxes
you have in your inbox.  If you need to
save them, copy them to a new
directory.

Summary of Contents for 005699-00 -






































































































Reviews:

No comments