Technical Data for 3B LASER PEN
General
Product name
3B Laser Pen
Device type
Low level laser therapy device
Proper use
Low-energy laser system for the treatment of pain, trigger and acupuncture
points as well as small skin areas
Classification and standards
Classification
Protection class II according to EN 60601-1
Application unit BF according to EN 60601-1
Class Iia according to RL 93/42 EEC
Laer class 3B according to EN 60825-1: 2008
EN 60825-1: 2008 100 cm
Without moisture protection (IPXO)
Standards
EN60601-1: 2006 Medical electrical devices
EN60601-1: 2007 Medical devices, EMC standard
IEC 60601-2-22: 2007 Medical devices, laser application standard
EN60825-1:
EN60825-1: 2007 Safety of laser devices
Laser Power
Effective laser output, wavelength
500 mW/808 nm
Setting of laser power
From 10% to 100% of the effective output in increments of 10%
Type of laser
Semiconductor laser 808 nm
Therapy programmes
See Appendix 1
Therapy times
10 minutes max., max. dose 60 J
Bgeam divergence
808 nm: x-direction 8-11°, y-direction 39-48°
Operation
Operating elements
“ON/OFF” key for switching the laser output on or off
“Laser” key for switching the laser output on or off
“SET”, “+”, “-“ keys for setting the therapy parameters (programmes, power
level, automatic operation)
Display elements
Green LED “POWER”: laser output is activated
Red LED “ERROR”: error message concerning laser power monitoring
LCD: 128x32 points to display the therapy parameters and error messages
Power supply
Power supply
Via integrated rechargeable batteries (NiMH)
Rechargeable batteries
NiMH (2 cells) / 1.2 V, AA size, 2,600 mAh capacity
Service life in battery-operated mode (when batteries are fully charged): >2h
Charging time: approx. 3 h
Manufacturer: e.g. Panasonic, HHR-3XRE, 2,600 mAh
Safety fuse
2A, power supply unit also short-circuit-proof
Mechanics and environment
Permissible temperature range
and relative humidity
Operating temperature: 10°C – 30°C
Storage temperature: 0°C – 50°C
Relative humidity: 30-75%
Ambient air pressure: >80 kPA
Dimensions
Applicator: W x H x D = 34 x 36 x 225 mm
Charging station: W x H x D = 107 x 35 x 106 mm
Weight
Applicator: approx. 200 g
Charging station: approx. 230 g
Housing
Plastic/ABS
Manufacturer
Name of manufacturer
Livetec GmbH, Marie-Curie-Str. 8, 79539 Lörrach, Germany
Conformity
CE 0197
WEEE reg. no.
FE 59335168
Soldy by
American 3B Scientific, 2189 Flintstone Dr., Suite O, Tucker, GA 30084, USA
phone 1.678.405.5807, cell 1.770.310.5886, fax 1.678.405.5728
19
Last revised 2017-09-26