02
Installation
Installation
Warning:
To prevent fire of shock hazard, do not expose the set to rain or moisture. Do not rub
or strike the Active Matrix LCD with anything hard as this may scratch, mar, or
damage the Active Matrix LCD permanently.
Service
Never remove the back cover of the unit, this can expose you to high voltage and other hazards.
If the unit does not operate properly, unplug it and call your dealer.
Antenna connect the antenna cable to the connection marked Ant. (on the rear).
For best reception, use an outdoor antenna.
Location
Position your unit so that no bright light or sunlight will shine directly on the screen.
Do not expose the unit to vibration, moisture, dust or heat. Also ensure that the unit
is placed in a position that allows a free flow of air. Do not cover the ventilation
openings on the back cover. You can install the unit on a wall or place it on a table-top
or similar flat surface. Mounted the unit securely to eliminate the risk of injury from
the unit falling. Contact your dealers to purchase the optional ceiling mount.
Cleaning
Unplug the unit before cleaning the face or the LCD Screen. Dust the unit by wiping
the screen and cabinet with a soft, clean cloth. If the screen requires additional cleaning
use a clean, damp cloth. Do not use liquid or aerosol cleaners.
Power:
This set operates on an AC main supply, the voltage is as indicated on the label on the
back cover.
Never apply any DC power to the set directly. Connect the power cord to an AC mains.
In the event of thunderstorms or power cuts, please pill out the mains and aerial plug of
the set.
Do not allow anything to rest upon or roll over the power cord, and do not place the set
where the power cord is subject to damage.
LC D D I S P L AY
LC D D I S P L AY
Summary of Contents for LT3032A01
Page 3: ......
