LM3000 LUMIN BIOBURDEN
REDUCTION UV SYSTEM
This device complies with Part 18 of the FCC Rules.
WARNING: This equipment has not been tested
based on FDA-recognized standard IEC 60601-1-
2:2014. It may produce electromagnetic
disturbances that will affect the performance of
other equipment. It may fail to perform as
expected in the presence of electromagnetic
disturbances from other equipment.
To reduce the risk associated with
electromagnetic fields interfering with other
devices in your healthcare facility:
•
Plug the Lumin LM3000 system into a separate
circuit.
•
Place the device and its cables as far as possible
from portable radiofrequency communications
equipment and other electrical devices.
•
Monitor the performance of this device and other
adjacent electrical devices to verify that they are
operating normally.
This equipment has been tested and found to comply
with the limits for a Consumer ISM equipment,
pursuant to Part 18 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation.
Please note that changes or modifications of this
product is not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This product may cause interference to radio
equipment and should not be installed near maritime
safety communications equipment, ships at sea, or
other critical navigation or communications equipment
operating between 0.45-30 MHz.
