3. Power the Aer X
Install the battery
Slide the battery cover out and up to open.
Insert the battery and close the cover.
Connect the power supply
• Connect the AC Power plug to the Power
Supply.
• Connect the AC Power Output Plug to
the power source.
• Connect the Power Plug to the Aer X.
CAUTION
Ensure the Power Supply is in a well-ventilated
location as it relies on air circulation for heat
dissipation. The Power Supply may become hot
during operation. Make sure the Power Supply cools
down before handling.
CAUTION
The Power Supply is not intended to be used near
water sources. Doing so will put you at risk of
damage to your unit and electric shock.
CAUTION
Do not disassemble the Power Supply. This may
lead to component failure and/or safety risk.
CAUTION
Do not place anything in the Power Supply port
other than the supplied wall cord. Avoid the use of
electrical extension cords with the Aer X. If an
extension cord must be used, use an extension
cord that has an Underwriters Laboratory (UL) Mark
and a minimum wire thickness of 18 gauge. Do not
connect any other devices to the same extension
cord.
16
