Eclipse HD SS v2.1.22
Page 3
1 Safety and Precautions
1. Please read these notes before attempting to operate the 360 Vision Eclipse HD Stainless Steel, and keep
for future reference.
2. DO NOT disassemble or remove covers. This will break the water seals and invalidate the warranty.
3. All servicing and repairs must be handled by 360 Vision Technology.
4. Avoid pointing the camera directly towards a bright light source (sunlight), or expose the camera to intensive
light situations as this may damage the camera pick-up device.
5. Installation should be carried out by suitably qualified personnel, in accordance with local codes of practice
and regulations.
6. 360 Vision Technology Limited accept no liability for any damage caused by incorrect or improper installation.
7. Use only 360 Vision Eclipse HD power supplies.
8. Please handle the Eclipse HD with care, as improper handling may cause damage within this unit.
2 Housing Dimensional Drawing
MUST NOT BE REPRODUCED OR SHOWN TO
DO NOT SCALE
ALL DIMENSIONS IN MM
REMOVE ALL SHARP EDGES
SHEET:
D
C
B
A
D
C
B
A
4
3
2
1
4
3
2
1
A3
DESCRIPTION
SCALE:
PERMISSION OF THE AUTHOR.
ANY THIRD PARTY WITHOUT THE DIRECT WRITTEN
C COPYRIGHT PROTECTED AND
THIS DRAWING AND ALL COPIES ARE
PART NUMBER:
0.167
3 OF 3
TOLERANCES:-
X = 0.5
X.X = 0.1
X.XX = 0.05
A3
3rd ANGLE PROJECTION
360 Vision Technology Ltd.
Unit 7, Seymour Court,
Manor Park, Runcorn, Cheshire,
WA7 1SY. United Kingdom.
www.360visiontechnology.com
365.0
PAN
SWEEP
490
TILT
SWEEP
215.0
9.0 (x4) ON
101.6 (4") PCD
51.0
125
MOUNTING
BASE
NAME:
M5650-B
ECLIPSE STAINLESS STEEL
ASSEMBLY AND BOM
ISS DATE
REFERENCE
A 250816
FIRST ISSUE
B 160916
TILT AND SWEEP UPDATED
250816
DATE :
K.CRAIK
RELEASED:
APPROVED:
ENGINEER:
-
-
MATERIAL:
FINISH:
SCALE 0.3
SCALE 0.3
SCALE 0.25
MOUNT PLATE
Weight 7.2kg
