360 Vision AVALON H 5004, User Manual, Page: 73 / 113

Chapter 4. AVALON H SETUP
4-15
4
OYP PTZ Configuration
This menu is used to configure any connected PTZ cameras.
PROTOCOL
‡
Select the camera protocol that is used for the connected PTZ camera.
ID
‡
Enter the ID number the same as the connected PTZ camera’s ID.
Checklist for PTZ camera activation:
1. Match the connected PTZ camera’s protocol
2. Set Baud Rate the same as the PTZ camera
3. Set Camera ID the same as the PTZ camera
4. PTZ start Self checking
Ex) Activating a Pelco-D PTZ.
1. Connect PTZ camera signal on to the RS485 port on the DVR
2. Select the Pelco-D protocol and set the Baud Rate/ ID for the PTZ.
3. Click the ‘SAVE’ button to save.