360 Systems Image Server 2000 Operation Manual Download Page 96

Page: 96 / 135

Page 96

Image Server 2000 Owner’s Manual

Rebuilding the RAID Array

Figure 27: Selecting a Drive to Use in Rebuilding the Array

•

Select

Rebuild Unit

. The REBUILD SCREEN above will appear.

•

Select the available drive by clicking the check box.

•

Press

. The RAID array will begin rebuilding with the new drive. This process may take a

long time, but the Image Server can still be used.

•

When complete, OK will be shown in the status for all ports on the MAINTENANCE menu.

Replacing Hard Drives

The Image Server hard disk drives have been factory tested and configured in a RAID 5 array. Each
drive is numbered (0-3) and must be attached to the correctly numbered data cable. Drive bays are
also numbered.

Please read

Removing the Front Panel

on page 98 for instructions on accessing the hard drive bays.

Detailed information about how to replace hard drives is on page 105.

Summary of Contents for Image Server 2000








































































































































Search results

Summary of Contents for Image Server 2000

Reviews:

Related manuals for Image Server 2000

Brands by name

Popular brands

360 Systems Image Server 2000, Operation Manual

Search results

Summary of Contents for Image Server 2000

Reviews:

Related manuals for Image Server 2000

Brands by name

Popular brands