32
•
Setup and Utility Menus
•
Select the
first
cut or Linear Playlist in a directory you wish to assign.
•
Go to the directory level.
•
Press the
UTILITY
button (or
F1
) and select ASSIGN HOT KEY.
•
Turn ON the keyboard’s Scroll Lock. Use the
selection knob
to choose the Hot Key number
or alpha-character for the Hot Key where the assignment is to begin.
•
Press the
ENTER
button to begin the mass assignment. Assignment will continue until all
cuts in the directory are assigned or all available Hot Keys are filled.
Viewing Hot Keys
•
Press the
UTILITY
button (or
F1
) and select ASSIGN HOT KEY or CLEAR HOT KEY.
•
Use the
Select Knob or Arrow Keys to scan the list of Hot Keys. The lower line of the display
will show ID and name of assigned Cuts.
•
Exit the mode by pressing
EXIT
, or either
F1
or
ESC
on the keyboard.
Clear Hot Key
Clears a Hot Key assignment. Equivalent key assignments on other devices will be cleared at
the same time. For example, clearing key A on the keyboard will also clear the assignments for
Hot Key 1 on an RC-series remote, and Bank-A/Key-1 on the DigiCart/EX front panel.
•
Press the
UTILITY
button (or
F1
) and select CLEAR HOT KEY.
•
Use the
selection controls to scan the list of Hot Keys. The lower line of the display will
show ID and name (if labeled) of assigned items.
•
Press
ENTER
to clear the assignment. Continue making other Hot Key assignments, or exit
the mode by pressing either
F1
or
ESC.
You may clear multiple Hot Keys in the current directory by entering the CLEAR HOT KEY
mode from the directory level. Clearing begins with the Hot Key index number shown on the
display.
EXIT
terminates after clearing the currently displayed selection.
Hot Key Lists
As a new feature in DigiCart/EX, Hot Key assignments can be stored and recalled in two ways,
either Network Drive or Local. The chief benefit of using Net Drive Hot Keys is that those Hot
Key assignments can be accessed by one or more users concurrently from anywhere on the
network. All recordings linked to Net Drive Hot Keys must be on the current network drive, in
any of the current drive’s directories.
Local Hot Key assignments are saved in a separate list stored on each DigiCart/EX. Local Hot
Keys can be made up of any mix of events from
different
local drives and directories (i.e. any
partitioned drive on the internal hard disk).
The PLAY HOT KEYS USING parameter in the Setup menu controls the default behavior for Hot
Key assignment lists. If this parameter is set to Net Drive, DigiCart/EX will use the Hot Key list
on the currently selected network drive. As you move from one network drive to another, the
Hot Keys list of the current drive will load automatically. If the current drive is changed to a
local drive, the Local Hot Keys list will automatically become active. There is only one Local
Hot Keys assignment list, rather than one per local drive partition.
Summary of Contents for DigiCart ex E-3000
Page 1: ...Owner s Manual ...
