360 Fitness YK-BK1704, Owner'S Manual

Page: 7 / 14

7
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FI G.2:
Slide the Vertical Seat Post (pt.10) into the
seat post housing on the main frame
(pt.16). Then slide the Seat Post (pt.12)
into the Vertical Seat Post (pt.10),then
Secure using a flat washer 1 (20) and
Locking knob (21).You will have to
slacken the knurled section of the L
Shape Knob (pt.7) and pull the knob back
and then select the desired height.
Release the knob and retighten the
knurled portion.
Now fix the Seat (pt.13) to the Seat Post
(pt.12) as shown, and tighten the bolts
around the screws under the seat.
FIG.1:
Attach the Front Stabilizer (pt.15) to the
Main Frame (pt.16) using two sets of
Ø
10
Flat Washers (pt.5), M10 Domed Nut (pt.6)
and M10*90 Carriage bolt (3).
Attach the Rear Stabilizer (pt.4) to the Main
Frame (pt.16) using two sets of
Ø
10 Flat
Washers (pt.5), M10 Domed Nut (pt.6) and
M10*90 Carriage bolt (3).