PLUMBING RECOMMENDATIONS:
To prevent excess fertilizer from dribbling out of the hoses
when product application is shut off, install one push to
connect polypropylene (Inlet x Outlet) 3/8” O.D. check valve
(not included) in the plumbing to each row prior to the 360
BANDIT orifices. Check valve is available at Dultmeier Sales
(Item #BUCV1103-P38).
A 50 mesh strainer (not included) can be used in the
complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifices.
Install orifice plates
19
in the rubber grommets
20
.
Assemble pluming components in the arrangement shown
above
21
.
Attach the plumbing assembly to each of the hoses coming
from the house guides
22
.
NOTE: If hoses are not fully seated in the push to connect,
they will leak. Hoses seat 7/8” of an inch deep or until you
hear a snap.
The supplied push to connect adapter in the 360 BANDIT kit
connects to 3/8” push to connect compatible hose.
Secure hoses to row unit with provided zip ties.
Insert 5/8” X 3” bolt
14
through the disk
15
. Insert bushing
16
(large side first) and hose guide assembly
17
(ear tab
18
facing in).
Slide bolt of the disk assembly into the lower hole on the
BANDIT
14
, aligning the ear tab
18
with corresponding
upper hole and secure with lock nut.
Tighten with 15/16” socket and wrench.
Using a mallet, install provided dust caps over disk bolt
heads.
Repeat for other side.
INSTALLATION INSTRUCTIONS
WHITE 8000
STEP 6
INSTALL DISK ASSEMBLIES
STEP 7
ASSEMBLE PLUMBING
INSTALLATION COMPLETE
PAGE 4
9
16
17
18
14
18
14
15
19
20
21
22
22