4
Notes :
1.
For cameras with operation current up to 680mA and transient peak current up to
1000mA, also a PS-10KU power stabilizer is normally required.
2.
For camera power over 8W and/or covering extended distances, local power supply
for camera is required.
3.
If local power is needed for camera and ground level difference effect occurs, the
Ground Loop Isolator (PF-ISO/PT-ISO) can be installed together with Mixer to
eliminate electrical noise and hum.
4.
For camera power range 9-16W (1300mA/12VDC), High Power Model (Signal
Processor : CI-01-ASP-DI, Mixer : PF150A12D) can be used. [ NO local power for
camera]
Video input
: 1Vp-p 75-ohm
Power Supply : 48VDC .Max
Operating temperature : -10
°
C ~ + 50
°
C
Dimensions
: 65mm x 35mm x 32mm
Suitable for any Camera with following specification:
Each Camera Rating
: 12V & 24V, 8W. Max.
Each Camera Video output : 1Vp-p 75-ohm
Specification
PF-ISO
PT-ISO
