Configuring Wi-Fi Protected Setup
63
HomePortal 3801HGV Gateway User Guide
Configuring LAN Devices
4.
Enter a 4 or 8 digit PIN in
Enter the PIN
text box. The PIN method requires a 4- or 8-digit
PIN.
5.
Click
Set WPS
. This saves the PIN configuration changes done for WPS.
Setting Up WPS through the Push Button Method
To set up WPS through the PIN method:
1.
Navigate to
Settings
>
LAN
>
Wireless
. The
Wireless
page appears.
2.
In the
Wi-Fi Protected Setup
section, enable the WPS by selecting the
Wi-Fi Protected
Setup
check box.
3.
Select
Push Button
from the drop-down list.
4.
Locate and push the WPS button found at the front panel of the device. The gateway
provides a push button on the front panel to enable the synchronization between the AP
and the client. You do not have to connect any devices to the gateway to enable it - simply
push the button on the gateway followed by pushing the button on the client device.
5.
Click
Set WPS
. This saves the
Push Button
configuration changes done for WPS.
Summary of Contents for HomePortal 3801HGV
Page 1: ...HomePortal 3801HGV Gateway User Guide Release 1 0 ...
Page 23: ...15 HomePortal 3801HGV Gateway User Guide Configuring Internet Connection ...
Page 62: ...Setting Up Wireless Network 54 HomePortal 3801HGV Gateway User Guide Configuring LAN Devices ...
Page 112: ...Viewing NAT Information 104 HomePortal 3801HGV Gateway User Guide Using Diagnostics Features ...
