Connect the Computer to the Gateway
9
USB to PC Connection
1.
Connect the provided AC power adapter from the 3700HGV-B’s
POWER
port to an electrical outlet. After
the 3700HGV-B has completed its start up process, the
POWER
light on the front of the 3700HGV-B
should be green.
2.
Connect the provided blue USB cable from the 3700HGV-B’s
USB-PC
port to the USB port on the
computer.
3.
If the VDSL signal is carried over the phone line
, connect the provided gray phone cable from the
3700HGV-B's
PHONE LINE
port to telephone wall jack. If the VDSL signal is carried over coax, refer to
Install the 2Wire Gateway USB Driver - Windows
1.
Insert the 2Wire setup CD in your computer’s CD-ROM drive.
2.
Power on the computer. If the Add Hardware Wizard displays, follow the on-screen instructions. If
prompted to identify where to search for drivers, deselect
Floppy Disk drive
and check
CD-ROM drive
.
3.
After the driver installs click
Finish
to complete the driver installation. The Setup Wizard will resume
when the PC has rebooted.
Note:
Microsoft Windows 98 users may be prompted to insert the Windows 98 installation CD-
ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are complete,
remove the Windows 98 CD and reinsert the Setup Wizard CD into the CD-ROM prior to rebooting
the PC.
