manualshive.com logo in svg

2Wire 2701HG Series, Installation Manual, Page: 83 / 132

Share
Download
2Wire 2701HG Series Installation Manual Download Page 83

Management and Diagnostic Console

78

Local Network - Address Allocation Page

The Local Network - Address Allocation page shows the name and IP address of each device on the 
gateway’s local network, and allows you to create DHCP mappings for each device.

Figure 34. MDC Local Network Address Allocation Page

To change the DHCP mapping for a device:

1.

From the IP Address pull-down menu next to the device, select an address from any of the
available networks.

2.

Click the 

Submit

 button.

Note: 

To access this page, your organization must have the Remote Management feature 

enabled. If the feature is not enabled, an error message will display when you click the link to 
access this page. 

Note: 

If you change the home network IP address range, you must renew the DHCP lease on 

all devices on your home network and manually reconfigure all devices configured with static IP 
addresses. 

Summary of Contents for 2701HG Series





































































































































Reviews:

No comments