2Wire 2701HG Series Installation Manual Download Page 22

Page: 22 / 132

Broadband Link Tab

Viewing Statistics

The View Broadband Link Statistics page shows statistics associated with the 2Wire gateway broadband
link, including cumulative DSL statistics.

To access the Broadband Link Statistics page:

•

Open a Web browser and access the gateway user interface by entering
http://gateway.2Wire.net.

•

Click the

Broadband Link

tab.

•

Click the Statistics link under the tab to open the View Broadband Link Statistics page.

Figure 10. View Broadband Link Statistics Page

The Transmit and Receive Data panel displays the following information.

•

Transmit.

The cumulative number of IP packets transmitted, the cumulative number of IP payload bytes

transmitted, and the number and percentage transmitted in error.

•

Receive.

The number of bytes and packets received, and the number and percentage received in error.

Summary of Contents for 2701HG Series





































































































































Search results

Summary of Contents for 2701HG Series

Reviews:

Brands by name

Popular brands

2Wire 2701HG Series, Installation Manual

Search results

Summary of Contents for 2701HG Series

Reviews:

Brands by name

Popular brands