7
6 2 ELECTRICAL WIRING CONNECTION
DO NOT OVERLOOK
•
The heater is connected using a cable with a power plug, which is a part of the unit.
•
The electric power supply (power socket) into which the heater is connected must be protected by a circuit breaker of at least 16A.
•
It is not possible to connect the heater using an extension cord.
•
The maximum bend of the electric power cable is 30mm.
6. INSTALLATION
6.3 CONTROL PANEL
152
176
161
190
30
max. 30mm
Connecting the remote control
The remote control does not need to be paired, it is already factory set.
The remote control is powered using 12V battery
(LR23A).
(batteries are supplied with the product). Possibility pair up to 60 devices to a single control. RF signal range is up to 30m
in open area.
5.
ON/OFF
ON/OFF
