2N SIP SPEAKER Configuration Manual Download Page 47

Page: 47 / 72

Configuration

3.2

Automatic Update

TFTP server address

The IP address of the TFTP server where the firmware and configuration are
located that are to be automatically uploaded to 2N

SIP Speaker.

Update firmware

Enable/disable automatic firmware downloading from the TFTP server.

Update time

Set a period for automatic firmware downloading attempts from the TFTP server.
2N

SIP Speaker periodically (at a predefined time once a day) checks the TFTP

server for a later firmware version. Having found one, 2N

SIP Speaker updates

the firmware and restarts automatically. With this parameter you can choose the
most convenient time of a day for updating (when 2N

SIP Speaker is not very

busy).

File prefix

Specify the TFTP firmware directory path or file prefix. 2N

SIP Speaker expects

the firmware file to be named Xss_app.bin, where X is the prefix specified in this
parameter.

Update configuration

Enable or disable automatic configuration downloading from the TFTP server.

Update period

Set the time interval after which 2N

SIP Speaker gets connected to the TFTP

server for configuration file downloading.

File prefix

Specify the TFTP configuration directory path or file prefix. 2N

SIP Speaker

expects the configuration file to be named Xss_config.ini, where X is the prefix
specified in this parameter.

System Log

This menu is used for configuration of system and log message sending. This service is
useful for solving 2N

SIP Speaker errors if any and contacting the 2N

TELEKOMUNIKACE a.s. Technical Support. Normally, it is not necessary to configure
this menu. To receive syslog messages, a syslog server has to be installed in your PC.

Summary of Contents for SIP SPEAKER









































































Search results

Summary of Contents for SIP SPEAKER

Reviews:

Brands by name

Popular brands

2N SIP SPEAKER, Configuration Manual

Search results

Summary of Contents for SIP SPEAKER

Reviews:

Brands by name

Popular brands