2N SIP SPEAKER Configuration Manual Download Page 24

Page: 24 / 72

Configuration

3.2

3.2 Configuration

SIP Speaker is configured through an integrated administration web server.

Connect 2N

SIP Speaker to the IP network and make sure that 2N

SIP Speaker is

powered.

Description of 2N

Helios IP Network Scanner

The purpose of this application is to find the dynamic IP address of 2N

SIP Speaker in

the local IP network. The application is available on the installation CD, which is part
of the 2N

SIP Speaker package. Microsoft NET Framework 2.0 is required for

installation.

Run the 2N

Helios IP Toolkit installer.

The installation wizard will guide you through the installation.

Figure 3.3 2N

Helios IP Network Scanner Installation Wizard

After installing the 2N

Helios IP Network Scanner application, run the

application using the

Start

menu of the Microsoft Windows operating system.

Upon launch, the application starts searching the LAN automatically for all

SIP Speakers with an assigned or statically set IP address. The devices are

then listed in a table.

Summary of Contents for SIP SPEAKER









































































Search results

Summary of Contents for SIP SPEAKER

Reviews:

Brands by name

Popular brands

2N SIP SPEAKER, Configuration Manual

Search results

Summary of Contents for SIP SPEAKER

Reviews:

Brands by name

Popular brands