2N TELEKOMUNIKACE a.s., www.2n.cz
16/82
2.1 Before You Start
Product Completeness Check
Check before installation whether the package of the
includes
2N LiftGate Main Unit
®
the following:
1x
2N LiftGate Main Unit
®
2 pcs + 2 pcs
Dowel (8 x 40 mm) with screws (4.5 x 50 mm)
1 pc
Antenna
1 pc
Battery pack
1 pc
Brief Manual
Installation Conditions
2N Liftgate
®
is designed for vertical mounting.
Install
with respect to the signal strength – check the LED indicator
2N LiftGate
®
status or display the information via the device web interface.
For the allowed range of operating temperatures refer to Section 5. Technical
Parameters
2N LiftGate
®
may not be operated on sites exposed to direct solar radiation or
near heat sources.
2N LiftGate
®
is designed for indoor applications. It may not be exposed to rain,
flowing water, condensing moisture, fog, etc.
2N LiftGate
®
may not be exposed to aggressive gas, acid vapors, solvents, etc.
Make sure there is enough free space above and under
for cabling
2N LiftGate
®
and flowing air to conduct heat away.
