manualshive.com logo in svg

2N Indoor Talk, User Manual

Share
Download
2N Indoor Talk User Manual Download Page 80

2N TELEKOMUNIKACE a.s., www.2n.cz

80/90

Button 

brightness 

setting

press 

 

 

simultaneously 

for 3 seconds

The device goes over to the 

button brightness setting state.

Incoming 

call

 

The call answering button is 

flashing.

Active Parental Lock in DND 

Active parental lock in 

DND

Parental 

lock 

deactivation

press 

 

 

simultaneously 

for 3 seconds

The buttons are activated. The 

device gets in the DND mode.

Incoming 

call

 

The call answering button is 

flashing. The lock and call end 

buttons are illuminated: yellow and 

red respectively. All of these 

buttons are inactive. The doorbell 

(DND) button is shining yellow. The 

other buttons are not backlit. 

Deactivate the parental lock to 

activate the buttons.

Active Parental Lock

Active parental lock

Parental 

lock 

deactivation

press 

 

 

simultaneously 

for 3 seconds

The buttons are activated. The 

device gets in the DND mode.

Summary of Contents for Indoor Talk



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands