manualshive.com logo in svg

2N Indoor Talk, User Manual

Share
Download
2N Indoor Talk User Manual Download Page 75

2N TELEKOMUNIKACE a.s., www.2n.cz

75/90

Call 

rejection

press 

The call is terminated, the 

device goes over to the relax 

mode.

Door 

unlocking

press 

Door unlocking is signalled by a 

green flash of the lock button 

and a tone. The other buttons 

do not change their states. The 

active call is terminated in 10 s if 

set so.

Parental 

lock 

deactivation

press 

 

 

simultaneously 

for 3 seconds

The buttons are activated and 

available again. The device gets 

in the Incoming call state.

Ringing 

volume up

press 

The volume level is increased. 

The state is signalled by a beep 

and louder ringtone. When the 

maximum volume is reached, 

the button starts flashing.

Ringing 

volume 

down

press 

The volume level is decreased. 

The state is signalled by a beep 

and more silent ringtone. When 

the minimum volume is reached, 

the button starts flashing.

At Call

At 

call

Door 

unlocking

press 

The door is unlocked. The device goes over to the call state, the lock 

is flashing green. The call is terminated after a timeout if set so.

Call end

press 

The call is terminated, the device returns to the relax mode.

Summary of Contents for Indoor Talk



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands