2N EasyGate Pro, User Manual

Page: 59 / 87

User Guide 2N® EasyGate PRO
59 / 87
Call hold
Check if your network supports the service before you use it.
This service relates to Call waiting described in 5.7. If there is call waiting on the line, you have
more possibilities what to do. Every action is made by FLASH and DTMF
code:
To terminate all held calls, or reject waiting call dial:
To terminating active call and accept the held or waiting call dial:
To place the active call on hold and accept the held or waiting call (switching between two calls)
or
To place the active call on hold to have possibility to dial other outgoing call dial:
To place all held calls to active calls and set up conference call dial:
To connect the two calls (active and held) and disconnect the EasyGate from both calls dial:
4.2 FAX and Data Function
Only EasyGate GSM with fax converter supports fax and data functions. Fax converter is
available for GSM versions of EasyGate only.
Sending fax message or modem connection to and from GSM
GSM fax and Data connection
EasyGate with fax converter has ability to send and receive GSM fax messages using analogue
fax Group 3 connected to telephone line FXS. The fax communication service must be registered
with your GSM operator. It is possible to establish data connection using analog modem
connected to FXS
line. It is useful for devices with build-in modem, without possibility to use
serial line. The data communication service must also be registered with your GSM operator.