2N ATEUS 501106E, User Manual

Page: 60 / 67

58
7.6. Service Parameters
Parameter Par.
No.
Range,
format
Def. Your choice Notes
Service password 901
3 – 8
digits
12345
Write only parameter!
Time 902 hhmmss
Date 903 ddmmyy
HW version 911 0-255 Read only parameter!
SW version 912 1.0 – 9.99 Read only parameter!
Serial No. 913 Read only parameter!
GSM module serial No. 914 Read only parameter!
Password for upgrade No. I. 921
Password - Dial Restriction only 922
Password - lock to operator. 923
Write only parameter!
Remote supervision enable 930 0 / 1 1
Applies to 2N
Supervision Centre too.
number 1 9311 max. 18 dig. -
number 2 9321 max. 18 dig. -
number 3 9331 max. 18 dig. -
CLIP –
Supervision
Centre number *)
number 4 9341 max. 18 dig. -
Dial the number
including international
prefix, e.g.
+420261301111 **)
for number 1 9312 0 / 1 1
for number 2 9322 0 / 1 1
for number 3 9332 0 / 1 1
Call-back
enable /
disable
for number 4 9342 0 / 1 1
0 = off
1 = on
for number 1 9313 max. 18 dig. -
for number 2 9323
max. 18 dig. -
for number 3 9333
max. 18 dig.
-
Call-back
numbers ***)
for number 4 9343 max. 18 dig.
-
*) It is the main SIM card number to identify the calling SIM card. It is because the SIM card can
have one or more (up to three) numbers. In case of calls incoming from an analog network, the
GSM operator differentiates, according to the required number, which service is required by
calling party - voice, data or fax connection. With outgoing calls, these numbers are not needed
because only one is used for identification.
**) If entered by phone, enter number including international prefix too - e.g. 00420261301111.
In some countries pay attention to parameter 115, international prefix may be different than 00.
***) If different than numbers 1 to 4, i.e. data numbers, if exists
Help to Parameters:
930 = this parameter can disable remote supervision including the 2N Supervision Centre.
9311, 9321, 9331, 9341 = Number to identify the calling Supervision Centre. If the Supervision
Centre SIM card has two numbers (voice and data), enter the voice number.
9312, 9322, 9332, 9342 = These parameters selects individually for each number, if call-back
will be used or not.
9313, 9323, 9333, 9343 = Number to be called in case the call-back function is on. If it is
identical with the number requesting call-back, you need not fill this parameter. If the
Supervision Centre SIM card has two numbers (voice and data), enter the data number.