manualshive.com logo in svg

2N Access Unit QR, User Manual, Page: 95 / 128

Share
Download
2N Access Unit QR User Manual Download Page 95

Installation Completion

Check the connection of all wires and in the board connector.

WARNING

• Make sure that all the terminals of the unused connectors are properly tightened to avoid 

vibrations caused by sound.

• An incorrectly made installation may compromise the device waterproofness. Water infil-

tration may damage the electronic part.

• Make sure that all the holes are filled with some waterproof material – the top part, around 

the cables and the screws.

• Use  silicone  or  some  other  sealant  to  seal  the  box  against  an  uneven  wall.  Thus,  you 

prevent water leakage and wall damping.

Most Frequent Installation Errors

Always mount the metal bolts and level the bases on an even surface 

before

 tightening the screws.

WARNING

Make  sure  that  the  bases  are  levelled  properly  to  avoid  water  leakage  and  electronic 
damage.

Installation

95

Summary of Contents for Access Unit QR

































































































































Reviews:

No comments