2N 91378601, User Manual

Page: 51 / 110

2N® Indoor View User Manual
51 / 110
a.
b.
c.
d.
e.
•
•
•
•
3.2.3.4 User Sounds
2N
®
Indoor View signals variable operational statuses with a sequence of tones. If the standard
signaling tones do not meet your requirements, you can modify them.
The device allows you to modify sound signaling for the following states:
Ringtone before call pickup
Ringing tone
Busy tone
Call end signaling
Doorbell
Sound Mapping
Ringing before Call Pickup – set the ringtone to be played before an incoming call is
picked up (device ringtone).
Ringback Tone – set the sound to be played when the called user is ringing. The PBX
ringtone is preferred to the user ringtone in the device.
Call Busy Tone – set the tone to be played when the called user is busy.
Call Hang-Up Signaling – set the tone to signal the call end.