2N 9135110E, Installation Manual

Page: 57 / 77

Installation manual 2N® Analog Vario
57 / 77
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
•
Signal Name Meaning
"Attention, your call is being
terminated" Signals that the preset maximum call
time will elapse within 10 seconds
during outgoing and incoming calls
"Wait, please" Optional message during call
establishing
"Communicator
number ...............is calling" Optional message for communicator
identification
Voice menu In the programming mode.
Call Termination Options – Summary
The busy or continuous tone *) after the call end.
The ringing tone *) after a predefined count of rings.
The subscriber 'at the other end' pressed .
The preset maximum call duration has elapsed.
30 seconds after the switch use has elapsed.
A 2N
®
Analog Vario button was pressed during the call.
The keypad button was pressed during the call (can be disabled).
*) The communicator is able to detect a permanent tone, busy tone and ringing tone even if the
tone has two frequency components as in the UK, the U.S.A. (the so-called BTT tone) and in
Canada. This new function does not require setting of any parameter. One of the tone components
must be of 440 Hz.
Code Lock
The electronic lock connected to 2N
®
Analog Vario can not only be activated by the phone but
also directly from the door using the keypad. In this mode, the keypad behaves like a standard
code lock with the following features:
Both switches can be controlled (if 2 connected)
Password length – 1 to 16 digits;
Up to 10 passwords per switch;
Switch activation time – 1 to 9 seconds;
Acoustic switch activation signalling – continuous tone.