manualshive.com logo in svg

2N Telekomunikace Helios 2ENTRY, User And Service Manual

Share
Download
2N Telekomunikace Helios 2ENTRY User And Service Manual Download Page 8

3.3. 

Increased Protection Accessories 

 

 

 

Part No. 9135511E 

Vandal resistant cover for basic 

unit + Flush mounting box *) 

Part No. 9135511KE  

Vandal resistant cover for 

basic unit with Flush 

mounting box *) 

Part No. 9135515E 

Vandal resistant cover for one 

extension unit + Flush 

mounting box *) 

*) Attention! This box is not 9135351E !!! It is a special box only for Vandal resistant covers.

 

 

The purpose of the covers shown above is to make the basic units or sets with up to 11 
buttons as weather and vandal resistant as possible. More extensive sets can be tailor-
made. Remember that the Vandal resistant set must always be flush mounted and 
needs no roof even if used outdoors. 

 

3.4. 

GSM ad VOIP connection accessories 

 

 

GSM gateway Easygate, 

501303E

 

Analog/VoIP gateway, 

Part No. 9134171E 

 

3.5. 

Display 

 

Black & white, Graphic LCD 128 x 64 pixels, 
white backlight, up to 1000 characters, 
configurable via USB interface, can be 
installed into any basic unit as an option. 
 
Part No. 9135240 

 

8 

VoIPon   www.voipon.co.uk   [email protected]   Tel: +44 (0)1245 808195   Fax: +44 (0)1245 808299 

Summary of Contents for Helios 2ENTRY










































Reviews:

No comments

Brands by name

Popular brands

Load more brands