2M Technology DVR 6000 Series User Manual Download Page 95

Page: 95 / 100

The rewritable machine and the hard disk are shared the same data lines.

The data is too much. Please stop recording and backup.

The data exceeds the backup storage.

The backup equipment is not compatible.

The backup equipment is damaged.

、

The

The keyboard

keyboard

keyboard can

can

can not

not

not control

control

control the

the

the DVR.

DVR.

Possible reasons are as followed:

The serial port of the DVR is not set correctly.

The address is not correct.

When multiple transformers are connected, the power supply is not large enough. Please

give each transformer individual power supply.

The distance is too far.

、

Alarm

Alarm can

can

can not

not

not be

be recessional.

recessional.

Possible reasons are as followed:

The setting of the alarm is not correct.

The alarm output is turned on manually.

The input machine is damaged or the connections are not correct.

There are some problems for specific program edition, Please update the program.

、

Alarm

Alarm is

is not

not

not working.

working.

Possible reasons are as followed:

The setting of the alarm is not correct.

The connection of the alarm is not correct.

The alarm input signal is not correct.

A alarm is connected with two loops synchronously.

、

The

The remote

remote

remote controller

controller

controller is

is not

not

not working,

working,

Possible reasons are as followed:

The remote control address is not correct.

The remote control distance is too far or the angle is too large.

The battery is used up.

The remote controller or the front panel of the recording machine is damaged.

Summary of Contents for DVR 6000 Series





































































































Search results

Summary of Contents for DVR 6000 Series

Reviews:

Related manuals for DVR 6000 Series

Brands by name

Popular brands

2M Technology DVR 6000 Series, User Manual

Search results

Summary of Contents for DVR 6000 Series

Reviews:

Related manuals for DVR 6000 Series

Brands by name

Popular brands