8
www.2MTechnology.net
Walkthrough Metal Detector with Single Wrist Thermal Sensor 2MTHWT-HMD
DISPLAY SPECIFICATION
I. Panel specification
1. The left side of the panel is zone panel. The big green light at the top is the power indicator light, and the big red
light next to it is the alarm indicator light. The small red lights below the power indicator light are used for loca
tion indicating. The vertical LED lights at the low right side are alarming intensity indicator lights.
2. The right side of the panel is the keypad, where the first row shows the number of alarms within O ~ 9999, the
second row shows the number of passed person within O ~ 9999 and the third row comprises of function keys
i.e. “RES”, “SEL”, “ADY’ and “ENT” from the left to the right.
3. After the machine is started, the green power indicator light will be On when no any metal article passes
through; the power indicator light will be Off when any metal article passes through and the red alarm / alarm
ing intensity indicator lights will be On with warning tone. The location indicator light will be on, too. The bright
area shows the location of the metal. The bigger the metal is, the more the intensity indicator lights will appear.
II. LED light bar specification
1. The 6 sections of LED light bar match with 6 zones of the WTMD body in order to show the location of detected
metal accurately.
2. The door plate edge indicator is LED light bar. When any metal article passes through, the some sections of the led
light bar will be On. The bright area shows the location of the metal article.When the metal near the left door, the left
side lights on, and the right door lights on when near the right door, so the door is divided into 12 zones.
