2M Technology 2MT-7232 Series Page 51 User Manual Download

Page: 51 / 79

Network Settings

HD TVI Hybrid DVR User Manual

②

Check the IP address and port of the transfer media server in the ECMS/NVMS. The

default server port for auto report is 2009. If it is modified, please go to the transfer
media interface to check.

③

Enable the auto report in the ECMS when adding a new device. Then self-define device

ID and input the remaining information of the device in the ECMS/NVMS.

④

Input the above-mentioned server IP, server port and device ID in the server interface.

Then click “Apply” button to save the setting. Now, the ECMS/NVMS system will
automatically connect this device.

11.5 NAT

①

Go to Main Menu



Setup



Network



NAT interface.

②

Enable NAT and input the NAT Server (The default NAT Server is

www.autonat.com

③

Click “Apply” to save the settings.

11.6 Other Settings

If your device is set to use PPPoE as its default network connection, you may set up DDNS to
be used in connection. The setting steps are as follows:

①

Enable DDNS server and then select the DDNS server type.

②

Enter user name, password and host domain name of the registered website.

③

Click “Test” button to test the effectiveness of the relevant information.

Summary of Contents for 2MT-7232 Series
















































































Search results

Summary of Contents for 2MT-7232 Series

Reviews:

Related manuals for 2MT-7232 Series

Brands by name

Popular brands

2M Technology 2MT-7232 Series, User Manual

Search results

Summary of Contents for 2MT-7232 Series

Reviews:

Related manuals for 2MT-7232 Series

Brands by name

Popular brands