2M Technology 2MT-7232 Series Page 34 User Manual Download

Page: 34 / 79

Playback

HD TVI Hybrid DVR User Manual

clipped record files in a box. Then click “Start” to back up the record files into the storage
device (see

Chapter 8

Backup

for more details).

【

Exit

】

: Exit the current interface.

【

Move tool

】

: Click and hold this button. Then drag the mouse to move this toolbar.

7.2 Playback by Time Search

①

Go to Main Menu



Time Search.

②

Select date and channels on the right hand side and press the “Search” button. A date

with highlighted borderline indicates presence of data.

③

Set the start time by clicking a particular grid or by entering the specific value in the

start time field.

④

Select the channel display mode and click Play

button to play record. Use the

playback toolbar to control the playback.

7.3 Playback by Event Search

①

Go to Main Menu



Event Search button.

②

Select date and channels on the right hand side. A data with highlighted borderline

indicates presence of data.

③

Checkmark Motion, Sensor or All accordingly.

④

Click “Search” button to display the searched event information in the event list box.

⑤

Double check a certain record file to playback.

Summary of Contents for 2MT-7232 Series
















































































Search results

Summary of Contents for 2MT-7232 Series

Reviews:

Related manuals for 2MT-7232 Series

Brands by name

Popular brands

2M Technology 2MT-7232 Series, User Manual

Search results

Summary of Contents for 2MT-7232 Series

Reviews:

Related manuals for 2MT-7232 Series

Brands by name

Popular brands