4
Installation
To install, locate 2 HP of space in your Eurorack case and confirm the positive
12 volts and negative 12 volts sides of the power distribution lines.
Plug the connector into the power distribution board of your case, keeping in mind
that the red band corresponds to negative 12 volts.
In most systems the negative 12 volt supply line is at the bottom.
The power cable should be connected to the Rnd with the red band facing the
bottom of the module.
Specifications
Format:
2 HP Eurorack module
Depth:
34mm (Skiff Friendly)
Max Current:
+12V = 40mA
-12V = 16mA
