Calling the System
1.
Dial the number of the premises.
If the premises has an answering machine, let the line ring once, hang up, and call again.
If the premises does not have an answering machine, wait until the system picks up the call (you will hear a continuous tone).
2.
After the tones, enter the two-digit remote access code.
3.
Enter your user code and press
#
.
4.
Choose one of the following options from the Operations menu:
Acknowledgment
Option
Input
Arm all partitions
1 > 1
Arm by partition
1 > 9 > Partition Number
Disarm all partitions
2 > 2
Disarm by partition
2 > 9 > Partition Number
Change zone bypass
3 > Zone Number > # > 9
Operate utility outputs
4 > Utility Output Number
Change Follow Me
numbers
5 > Follow Me Number > # > 2
> New Phone Number > # > 1
Listen in
6 > 1
Talk
6 > 2
Listen and talk
6 > 3
Record messages
7
Exit the system
0
Repeat the
Operations menu
#
Return to the
previous menu
*
2GIG Vario Quick User Guide
8
Copyright © 2016 Nortek Security & Control LLC
