Unit Mounting
The location of outdoor station should keep away from snow,rain,and intensity light.
Accessory contents:
Accessories include a screwdriver T20, one M4X10 screw, two PA4X25 screws,three PA3x25
screws,three PM3x12 screws,and five screw stoppers Φ6X30.
Installation steps:
Installation height for door station usually is 145~160cm.
1. Use screws to fix the back panel and rainy cover to the wall after connect the cable correctly.
2. Attach the front panel to the back panel, then use the screw to fix it.
Wiring and Connection
Basic one-to-one connection
1
2
3
4
7
5
6
M4*10
PM3*12
1
2
3
-
+
Monitor
Bus PL S2+ S1+ S1-
BUS(Blue&Green);
S2+(Red); PL(White); S1+(Yellow); S1-(Black);
AC~
PC6
1 2 3
ON
1 2 3
1 2 3
ON
1 2 3
BUS(Blue&Green)
S2+(Red)
PL(White)
S1+(Yellow)
S1-(Black)
4P
terminal
DIP
PROG
SPK adjust
Lock Control
Jumper
CALL button
please refer to DT-CAM user instructions in details.
PL(White): external lock power input, connect to the power positive(power +).
S1+(Yellow): lock power(+) output.
S1-(Black): lock power(-) output.
Parts and Function
Speaker
Unlock Indicator
Talk Indicator
Front Panel
Call Button
Microphone
1
2
3
4
5
6
Terminal Description
The audio door station is designed for the CDV 2Easy 2-wire system. The 17-D is made of
zinc alloy for protection against vandalism including the call button featuring a blue
backlight for auxiliary illumination. The door unlock and speech LED indicator show
visual verification of operation. The rain cover provides protection adverse weather.
Connection
Cable
BUS(Blue&Green): connect to the bus line, no polarity.
S2+(Red): the S2+ connect with S1- to activate the relay of ERL to extend a camera
of DT-CAM, please refer to DT-CAM user instructions in details.
◆
Lock Control Jumper:
For selection of lock type. Please refer to Electric Lock Connection: Pg7.
◆
DIP switch:
to set ID code for door station, total 4 door stations can be supported. Please refer to
DIP Switch Settings.
◆
SPK adjust:
to adjust the talk volume.
◆
PROG button:
reserved.
◆
CALL button:
press to call the user.
◆
4P terminal:
to update software via specified programmer.
◆
Connection cable:
to connect the bus line and the electronic locks.
7
Rain Cover
-
1
-
Summary of Contents for 17-D
Page 11: ......
