EN
4
5
Product introduction
1. DC5.5*2.1 Input Only
2. Cooling Fan
3. Power Station Description
4. AC230 VDE(EU) Socket
5. USB-A Output
6. DC5.5*2.1 – 12V Output Only
7. Type-C Input / Output PD100W
8. Main Power Button / DC Output Switch
9. LED Screen Display
10. AC Output Switch
11. LED Torch Switch
12. LED Torch
1. USB-A Output and Type-C Output, no need to do any actions,
connect your device, the Power Station will be discharged
automatically.
2. Press the Light Button (11) for 3-5 seconds, the lighting will be
turned on, click the light button to switch different modes (Weak/
Strong/Blink).
3. The following steps must start the Power Station: Press Power
Button (8) for 3-5 seconds
a. When the Screen is lighted on, press the Power Button again to start
DC Output, then 2*DC5.5(at the bottom of the left side of the screen, 6)
can be output.
b. Press the AC Power Button (10) for 3-5seconds,the Screen show
moment Voltage 230V means AC Socket can be output. Press AC Power
Button again for 3-5seconds to cut off the AC Output.
Notice:
1. It is recommended that the loaded device should not exceed 300W, and the
excessive power may cause output protection or burn out the product.
2
3
8
10
9
1
4
6
7
12
5
