background image

Five-in-one multi-function air pump

Product Instruction Manual

Welcome to choose this product!

Please read the product instructions carefully before using.

After reading, please save it for subsequent reference.

Please note that this manual does not contain the software

and hardware configuration instructions and related

information of the product. If you need help, please consult

the seller.

The pictures in this manual are for reference only. Please

refer to the product in kind.

10000mAh/37Wh

Operation: 

Press and hold "ON/OFF Switch" to start the machine; 

click  "ON/OFF Switch" to turn on LED lights, and cycle as following:
1. Turn on LED Flashlight 
2. Turn on LED Flashlight SOS mode
3. Turn on LED Flashlight Strobe mode
4. Turn on Reading light
5. Turn off LED lights

Note:

 This product can be used to supply air to the tyres of domestic

vehicles, such as 0-3.3 bar or 0-47 PSi, bicycle tyres, balls, etc.

Charging instructions:

1. According to the need to inflate the equipment, the installation of the

corresponding gas nozzle.

2. Connect the air pipe between the air pump and the required inflation device.

3. Press ON/OFF  switch to start, then press  M key to the required inflating

equipment model test, press +/-to adjust the tire pressure size.

4. Press "Unit switch" to select BAR, KPA, KG/CM2/PSI modes.

5. Press and hold "M" key to restore factory settings of air pump

6. Press Air pump key to start the pump.

7. When it is filled, stop inflating, press  AIR to turn off the machine,

remove the windpipe and put it back into the package.
Tire pressure test instructions

1. According to the need to test the tire pressure equipment, the

installation of the corresponding air nozzle.

2. Connect the air pipe between the air pump and the required

inflation device.

3. Press AIR pump key to power on, and the current tire pressure will be displayed

ON the screen. 

Warning:

1. This product is filled with air in the way of automatic filling and stopping.

When setting the tire pressure, we should evaluate or find the

corresponding tire pressure, so as to avoid over-inflating and resulting in

tire blowout!

2. The mechanical parts of air pump consist of motor and cylinder. These

two parts produce heat.

Standard range of conventional inflation table

Inflatable object :

2. Motorcycles
3. Bicycles
4. Road bikes
5. Basketball
5. Football
5. Volleyball
6. in the news

Range BAR

2.3 - 2.5
1.8 - 3.0
2.4 - 4.1
6.9 - 8.2
0.5 - 0.6
0.6 - 0.7
0.4 - 0.5

Range PSI

33 - 36
26 -4 3
35 - 60

100 - 120

7 - 9

9 - 11

6 - 7

1.Motor vehicles for domestic use (tyres with air pressure up to 3.3 Bar Range Bar)

     Warning:

Reading light and flashlight are too strong,
Please don't shoot directly into people's eyes!

LED Flashlight

Reading light

1

 Usage specification

Product side schematic

2

How to use the light (divided into four modes)

3

 Brief description of using air pump

 Unit switch

Menu key

 Air pump key

Up turn key

Down turn key

Display screen

Air Pump interface

12V Car emergency start output

 ON/OFF Switch

5VUSB OUT

5V IN PUT

LED Flashlight

 ON/OFF Switch

1. CAR INFLATION SETTINGS: Press the ON/OFF switch to turn on the 

machine, then press the M key to enter the car inflation menu bar, the default 

display 2.5 bar, press the +/-key can increase or decrease the preset automatic 

stop value. The car charging gear can be set according to the pressure of the

motorcycle tire to inflate the motorcycle.

2. Bicycle inflation settings: press the ON/OFF switch to turn on the machine, 

then press M twice to enter the bicycle inflation menu bar, the default display 

2.5 bar, press the +/-key to increase or decrease the automatic charge and stop

value.

3.Ball filling setting: press the ON/OFF switch to open the machine, then press M

key three times to enter the ball inflating menu bar, the default display 0.3 bar,

press +/-key to increase or decrease the automatic filling and stopping value.

4.Air Pressure Unit setting: Press the ON/OFF switch to turn on the machine, 

then press  M key four times to enter the air pressure unit setting Menu Bar,

press +/-to switch BAR and PSI air pressure unit.

5.After the above settings are completed, press  M again to exit the settings.

7

 Instructions for setting up an air-filled pump

8

 Product description

Use operation:

1. Connect the original jump cable to the " 12V car emergency 

start socket", then connect the clamps to the positive and negative

 terminals of vehicle battery (for 12V battery only)

2. Start the car.

3. After the car starts, please remove the battery clamp from the

car battery and let the car engine continue to rún.

     W

ar

ning!

Do not misconnect the battery clamp with the positive and

negative electrodes of the automobile battery during use. Do not

clamp red or black clips or touch each other

.

4

 Use this product to ignite/emergency start 12V  vechiles

The red battery clamp is

connected to the positive

pole of the battery.

Black Start Battery

Clamp Connected to 

Automotive

Battery Negative.

Operation:

 Before charging, please ensure that this product is in

power-off state.

A: It is charged by an AC power supply

AC power supply is 

optional, need to buy it separately

.

1. Connect the mobile phone 5V charger to the TPYE-C input port.

2. Connect the AC plug to the indoor AC outlet and start charging.

B: It is charged by solar energy (the solar energy package is

optional, you need to buy it separately).

1. Connect the output terminal of the solar panel rated at 5V-7V to the

TPYE-C input terminal of the product.

2. Adjust the solar panel to the direction of stronger sunlight and start

charging.

TIP: 1. Try to make the solar panel and The Sun Light into about 90

degrees angle, so that the best charging effect.

2. During the charging process of the product, the electric quantity icon

is flashing, and the long light grid number represents the actual

electric quantity of the product. At the end of the charge, the charge

icon lights up.

5

 How to charge the machine

5V IN

1. Before using this product, please read and understand the operation 

instructions of this product in detail. When charging, please use the 

designated charger and charge according

2. to the instructions. Charge with constant current and constant voltage. No 

reverse charging is allowed.

3. This product has built-in high-quality batteries, 'no memory effect, large 

capacity, durable (recommended ambient temperature is -20� to 60C).

4. If you do not use this product for a long time, in order to prolong the 

service life of the battery, please charge the product every 3 to 6 months.

5. This device is built-in non-removable battery. Do not attempt to remove 

the battery to avoid damage to the equipment.

6. Charger and this product will, be accompanied by slight heat when 

charging, which is a normal phenomenon.

7. Please keep this product away from fire, water and other liguids. Prevent 

direct sunshine.

8. Do not short circuit the product, avoid storing with coins, jewelry, keys 

and other metal items.

9. This product has built-in high yoltage power, non-professional personnel 

should not attempt to disassemble the product by themselves, in order to 

avoid accidents.

10. After the service life of batteries is over, please do not discard this 

product at will, in order to avoid damaging the environment. Please dispose 

of used batteries in accordance with local laws and regulations.

6

 Product Specification Parameters

X7

Numerical value     Unit

Battery capacity

1S4P(14.8V/2500mAh)

1 0

0 00

mAh

37

Wh

JUMP Start EC5

12

V

400

A

Maximum starting 

vehicle displacement

Gasoline

6.0

CC

Diesel

 

<3.0

CC

USB-5V OUT

Maximum curren

2.4

A

USB-C 5V IN

2.4

A

Charging time

4-5

h

Power

10

w

Light Mode

High beam - 1300 lumen

SOS

Strobe

Power

3

w

Weight(L155.5*W106.5*H61.5mm)

0.6

kg

Automatic shutdown time

10

s

Barometric unit

PSI

BAR

Preset pump setting 

Cars

36

PSI

2.5

BAR

Bicycle

36

PSI

2.5

BAR

Ball Games

5

PSI

0.3

BAR

Maximum pump setting

Cars

47

PSI

3.3

BAR

Bicycle

123

PSI

8.5

BAR

Ball Games

15

PSI

1.1

BAR

Minimum inflating setting

Cars

24

PSI

1.7

BAR

Bicycle

10

PSI

0.7

BAR

Ball Games

4

PSI

0.3

BAR

Specification of tracheal 

joint

All metal parts

French-american head

Needle Air NOZZLE

Ball Games

TWO BLACK GAS NOAALE:Plastic Gas 

nozzle,ball,boats,inflatable toys and other 

inflatable

/1000

LED flashlight

Reading light

Summary of Contents for 2E-CJSPBPL-BK





























Reviews: