– 6 –
EN
2. Take out the stem and base. Use the included screwdriver and one screw to fasten base to the stem.
3. Remove the foam covering the bottom of the monitor, then remove the adapter from the back of
monitor. Use two screws to fasten adapter onto the stem.
4. With the stand fully assembled, reattach it onto the back of monitor. Then remove the remaining foam
on monitor and stand it up on a flat, level desktop or table. Press the button to remove the monitor from
the bracket if mounting.
Note:
Make sure the monitor is laid on a flat surface before removing the stand.
Summary of Contents for G2721BV
Page 39: ......
