6
•
Don’t dispose of the device in a fire as it will result in an explosion.
•
Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
•
Don’t let the device fall on the floor. The internal circuit might get damaged.
•
Don’t attempt to disassemble the device as it may get damaged if you are not professional.
In case the device doesn’t function properly, send it to the store you bought it. The staff will help you
to the problem.
Specifications
Operating distance
33 Feet
Working time
4-5 hours
Charging input voltage
DC 5V
Charging time
1.5 ~ 2.5hours
Driver unit :
40mm 32R
Built-In Battery
150mAh
(Note: Battery life & charging time may vary based on usage & types of devices used.)
FCC-ID: 2AIDL-HPBT290
FCC STATEMENT
1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
