manualshive.com logo in svg

2B Technologies Ozone Monitor 106-L, Operation Manual

Share
Download
2B Technologies Ozone Monitor 106-L Operation Manual Download Page 44

 

Model 106-L Ozone Monitor Manual Rev. E 

37

 

7.  USB INSTALLATION 

The following procedure describes how to install the USB connection for the 
Model 106.  
 

Items Required 
 

1.  Model 106 Ozone Monitor 
2. USB Cable 
3.  PC Computer with Windows 2000 or XP 
4.  USB to UART Driver Disk 

 
Driver Installation 
 

1.  Insert USB to UART Driver Disk in the computer’s CD ROM drive. 
2.  The installation files are located in a zip folder on the CD.  Navigate to 

the folder labeled “cdc_NTXP” and double click on it. 

3.  Unzip the contents to a folder on the desktop or any area you wish. 
4.  With the Model 106 off, attach USB cable from the 106 to a USB port on 

the computer. 

5.  Turn on Model 106.  The install wizard should pop up as follows.  Select 

“No, not this time” and click “Next”. 

 

 

 
6.  Select the “Install from a specific location” option and click “Next”. 

Summary of Contents for Ozone Monitor 106-L

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands