247Security mDVR 600 Series User Manual Download Page 13

Page: 13 / 56

247Security Inc. | 4400 North Point Parkway, Suite # 158, Alpharetta, GA 30022, USA | 1-866-693-7492 | www.247securityinc.com

2.2.3.

COMMUNICATIONS DISPLAY CONTROLLER (C.D.C.) CONNECTOR

This connector allows the user to connect a C.D.C. which is a LCD monitor with video out capabilities and

manual video controls including live view, playback, record start/stop, volume controls, and video status

indicators. (FOR FUTURE USE)

Pin Number

Signal Description

Pin out

Audio OUT GND

Audio OUT

Video OUT + / Video OUT RCA

Video OUT - / Video OUT GND

Turn Power ON

RS232 TXD

RS232 RXD

GND

+12VDC OUT

+3VDC Standby

2.2.4.

POWER INPUT CONNECTOR

The mDVR618 has a built-in Intelligent power switcher that can operate from +8V ~ +24V DC-IN. The

ON/OFF signal connects to the vehicle’s ignition signal. The mDVR618 uses this signal to trigger the power shut-off

delay and the timing circuitry. The mDVR618 will remain ON until the shut-off delay time has been reached. The

system will then go through its normal shutdown procedures before completely powering down. The GND

(Common DC ground) signal should be connected to the vehicle common ground.

Pin Number

Signal

Description

Pin out

ON/OFF

On/Off Switch

On when 6V ~ VIN

Off when 0V ~ 0.5V

GND

Ground

VIN

Input voltage (+8V~+24VDC)

GND

Ground

2.2.5.

CAMERA 1,2,3, AND 8 CONNECTORS

The mDVR618 supports a maximum of 8 cameras. These Micro-fit connectors are used to connect the

eight camera inputs to the mDVR618 system (video and audio). Also included in each camera connection is

DV12V Out to power the camera. You can refer to the cover of the DVR for the PIN assignments of each connector.

If any of these cameras are not connected properly (for instance loose cables, unplugged etc…) than the

mDVR618 intelligently notifies the end-users with “NO VIDEO” on the preview screen. Camera inputs are labeled

CAMERA 1, CAMERA 2, CAMERA 3, and CAMERA 4.

Pin Number

Signal

Description

Pin out

MIC-IN

Microphone In

GND

Ground

Video+

Video In (+)

Video-

Video In (-)

+12VDC

+12VDC OUT

GND

Ground

Summary of Contents for mDVR 600 Series
























































Search results

Summary of Contents for mDVR 600 Series

Reviews:

Related manuals for mDVR 600 Series

Brands by name

Popular brands

247Security mDVR 600 Series, User Manual

Search results

Summary of Contents for mDVR 600 Series

Reviews:

Related manuals for mDVR 600 Series

Brands by name

Popular brands