* option in future software releases
OWNERS MANUAL
V 4 . 8 / M ä r z 2 0 2 0
CONNECTIONs, LEDs and BUTTON:
AUX:
3-pin solder port for auxiliary connections*
BUTTON:
shutdown system after use
FULL:
(green) indicates full charge
60%:
(green) indicates 60%-80% charge
20%:
(yellow) indicates charging active (blinking)
or 20%-60% charge (solid)
PWR:
(red) indicates system standby (solid)
or setup (blinking after startup)
or buffer active (blinking during normal operation)
OPERATION:
1)
Connection: Install buffer to a free port on your FBL or Receiver
2)
Power on your Model
3)
The buffer unit detects operating voltage automatically 5.6 – 10V.
(red LED is flashing)
4)
Charging will start when setup is complete (yellow LED is flashing)
5)
Green LEDs indicate charge state.
6)
When charging is complete, yellow LED is constantly on
7)
When system is supplying current (buffering surges, servo reverse current
or emergency supply) red LED is flashing
8)
After flight, first power down model
9)
Press button to shut down system
