App
The “1Control” App is free and can be downloaded from the
Stores for iPhone and Android.
It is compatible with the following systems:
- Smartphone iPhone 4S or later with iOS 9 or later
- Smartphone Android with 4.3 system or later and Bluetooth
LE 4
“1Control” app is able to manage many 1Control devices at the
same time.
First installation
1. Download the “1Control” app from your smartphone’s store
2. Connect with the app to the SOLO and set a secret PIN code
3. Copy the remote control following the guided procedure by
the app
4. Place the SOLO near the automation to be controlled
Copy of a remote control
The copy of a remote control takes place by following the
wizard available on the app.
SOLO is able to automatically recognize the type of remote
control you are copying and to provide the appropriate copy
procedure through the app.
NB: When copying a remote control it is advisable to be near
the relative gate or garage.
The complete list of compatible remote controls is available on
the 1Control website or in the Complete Guide.
Shares
Device administrators can share an access stored on SOLO via
the app.
All users who wish to receive a share must register via the app
by entering their phone number. NB: it is not possible to use the
same phone number to register from different smartphones.
The administrator can share an access to a user by indicating
his phone number. It is possible to set time constraints (start
and end date, days of the week, hours of the day) to shares.
To share an access it is not necessary to be near the device,
this operation can also be performed remotely.
Factory reset
You can completely delete all data stored on SOLO by restoring
it to factory conditions. To reset, press and hold the internal key
for more than 10 seconds. Resetting the device can take up to
2 minutes.
The restoration of the device causes the loss of all the
memorized remote controls and invalidates all the shares
created.
After sales service
In case of problems write to [email protected]
Pack contents
1 SOLO device
1 wall or pole fastening support
2 wall fastening anchors with relative screws
2 pole fastening clamps
2 batteries (already fitted)
Other details
Dimensions: 39x102x134mm
Weight (batteries included): 350g
GTIN/EAN Code: 8056772850130 (EU market)
8056772850239 (FR Market)
2/2
1Control SOLO - Technical sheet
