Description
1Control SOLO is an electronic device that allows the operation
of a radio-controlled automation, such as a gate or a garage,
using a smartphone. SOLO is able to copy the automation
remote control and therefore to control it behaving like the
original remote control.
Control of an automation
SOLO is able to copy the automation remote control and
therefore to control it behaving like the original remote control.
It is able to copy all fixed-coded remote controls and most
rolling-code remote controls, in the 433.0 MHz to 868.0 MHz
frequency bands, using the AM and FM modulations. The
old low-frequency remote controls, called quartz, are not
compatible.
The complete list of compatible remote controls is available on
the 1Control website or in the Complete Guide.
To control an automation, it is sufficient to copy a single remote
control, it is not necessary to copy the remote controls of all
users.
SOLO communicates with smartphone using the Bluetooth LE
4 protocol. Therefore it is not necessary to have an Internet
connection to open gate and garage.
Operating distance
The max distance between SOLO and an automation to be
controlled varies according to the type of radio-control used.
Normally such distance is between 20 and 40 meters.
The max distance between SOLO and a smartphone varies
according to the model of smartphone used and is normally
about 15-20 meters.
To maximize the range of SOLO it is advisable to place it at
least 1 meter from the ground and in a place where there are no
obstacles between the user and SOLO.
Reinforced concrete walls or metal boxes can weaken or block
the SOLO signal.
Operating conditions
SOLO is resistant to atmospheric agents, is rainproof,
snowproof and resistant to sunrays. It is IP66 certified.
Security
When using SOLO for the first time, an 8-digit numeric PIN code
must be set. This PIN must be kept secret. PIN code holders are
considered administrators of the device. It is possible to reset
the PIN by performing a factory reset of SOLO.
The SOLO administrator can invite other users to use an
automation, without giving them the PIN code, using the
sharing features offered by the app.
The communication between SOLO and a smartphone is
protected by latest-generation security algorithms based
on public keys and end-to-end symmetric encryption with
ephemeral keys.
The communication between SOLO and an automation uses
the same security algorithms as the copied remote control.
Therefore the degree of security offered in this communication
is the same as that of the remote control.
Power supply
SOLO is supplied with the batteries already fitted and it is
already switched on.
The batteries can be replaced when they are flat. SOLO keeps
the copied remote controls and shared accesses in memory
even when it is not energized.
You can check the charge status of the batteries using the app.
Battery life varies according to the number of drives (openings
or closures) made:
Date and time
SOLO is equipped with an internal clock that is used to check
the users’ access time rights. The internal clock manages the
European daylight saving time independently. The date will be
set automatically by the app at the first start.
Data and limitations
SOLO can control up to 4 different radio-controlled
automations.
It can be used by 10 people / smartphones, you can buy more
users from the app.
1/2
Average
duration
4
10
20
48 months
24 months
12 months
Daily
openings
1Control SOLO - Technical sheet
