background image

If the Fog Machine does not work at all when it is connected to the power socket, then it is probably that the fuse 

has been broken.

WARNING: Risk of electric shock and fire. Disconnect from power socket before replacing the fuse.

1. Turn the fuse knob counterclockwise to reveal the fuse.

2. Replace the fuse with the same size and type fuse: 5A, 125V

3. Place fuse in cover and reinstall by turning clockwise. Be sure not to over tighten.

 Please read through this instructions manual before use.

 Before use, check the fog machine to see if there is any crack in the product cover, wired control cable and box, 

power cable and plug. Make sure there is not any exposed wire. Do not use if any of the above conditions is found.

 The fog machine will become hot during use. After use, please wait for some minutes before trying to touch it by 

hand.

 Keep away from the spray nozzle at least 0.5 meters when the nozzle spraying fog.

 DO NOT expose the fog to any asthmatics or allergenic sensitive people.

 Attention! Do not place the product onto wet or uneven surfaces. Accidental falls may cause fire.

 The product shall be changed if it has become damaged or thermally deformed. Disconnect this product from 

power immediately in case of malfunction. Do not resume use until it’s repaired.

 Do not use the Fog Machine or Remote Control Transmitter outdoors. They are not waterproof.

 Do not operate the product without fog liquid. Check the level of fog liquid every 30 minutes during use, and 

check before use every time. The product will be burned out if works without the fog liquid.

 Pour fog liquid carefully to avoid spills which could result in electrical shock. Do not use if liquid spills onto the 

machine. Let it dry completely before plugging in. Do not overfill the fog liquid.

 Do not spray in the direction Of flames or people.

 Do not open unit. Only an electrician can change the power cable.

 This product is not a toy. Please keep this unit out of reach of children and pets.

 Close supervision is necessary when this product is used by invalids, or disabled persons, or near children.

 Use this product only for its intended use as described in these instructions. Do not use attachments not recom-

mended by the manufacturer.

 Keep the power cable away from heated surfaces.

 Keep away from flames and flammable / explosive substances to avoid fire or explosions. Never pour other liquids 

such as water, gas, oil etc. into the fog machine.

 Never drop or insert any object into any opening.

 Please unplug the power cable if you want to stop use of this unit for long time.

 Use the fog machine in well-ventilated areas. Avoid the fog to be sprayed to food or pets.

 It is suggested not to breathe the fog for a long time.

 The external flexible cable of this product cannot be replaced; if the power cable is damaged, the product shall be 

destroyed. Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been 

dropped or damaged, or dropped into water.

 The fog may set off some smoke detectors or sprinkler systems. Please test to see if any smoke detector or sprinkler 

system will be activated by fog or not. It is necessary to make sure the room has adequate ventilation.

Fuse Replacement

Cautions and Warnings

Summary of Contents for O00QL-0045






Reviews: