A: Fog Machine
B: Wired Control Box and Cable
C: Fog Liquid (not included)
D: Plastic water bag
E: Power Cable
(a) It is normal if there is condensation on the nozzle of the Fog Machine.
(b) A small amount of fog may spray during or after operation.
(c) The Fog Machine will have to reheat after long spray. It will stop operation for a short period in order to heat up
to operating temperature again. While this is happening, fog cannot be produced. The Wired Control Indication
Light will turn on again when the unit is ready to generate more fog.
(d) All fog machines are apt to clogging due to the consistency of Fog Liquid and the high temperatures at which
it vaporizes.
(e) Please check the ice level every 30 minutes and Maintenance and Cleaningrefill ice according to the above
point 5 if you need the machine to spray low-lying fog.
●
Maintenance and cleaning shall only be done to the product surface. Unplug this product from the power socket
before cleaning.
●
Do not wet any electric parts of this product. Please use a dry, soft cloth instead of sharp tools for cleaning.
●
If you find there is any subsidence or residue, it is advised to empty all Fog Liquid from the machine and clean the
tank. Please unplug the machine from power socket before cleaning.
To store the machine for an extended period of time, it is important to take out the ice from the ice reservoir and
dry it up.
1. Remove the ice. Take out the ice from the ice reservoir and dry it up.
2. Remove the tank lid. Pour out the fog liquid in the fog machine to a container.
3. Keep the fog machine working for a few seconds to run out the fog liquid in the fog machine.
4. Fill a little fog machine cleaner liquid in the tank, and keep the fog machine working till running out.
5. Switch off, unplug the fog machine, and put it on a flat, dry place.
Additional Information
Storage
Maintenance and Cleaning
