12
13
EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
6. To play the recorded file, press the
Function
button to select
USB
mode and
press the button to start playback. Press the
/
buttons to search
previous/next tracks.
NOTES:
• Don’t forget that you must return the Tone Arm to the Tone Arm Rest manually after
recording.
• Make sure the USB device has enough available memory for all the recordings.
• Bluetooth/AM Radio/FM Radio and Aux Out cannot be recorded.
MAINTENANCE AND CARE
• Always remove the power cable plug from the power outlet before cleaning the
turntable.
• Clean the turntable with a slightly damp cloth. Do not use any chemical or
abrasive cleaning agents.
• If you do not intend to use the turntable for a long period of time, store it in a
clean, dry place away from direct sunlight.
TROUBLESHOOTING
If you have followed the instructions and are having difficulty operating the unit,
locate the PROBLEM in the left column below. Check the corresponding POSSIBLE
CAUSES AND SOLUTIONS column to locate and fix the problem.
Problem
Possible Causes and Solutions
No power
• Ensure that the turntable is powered ON.
• Check that the master volume is not turned to a minimum.
• Remove the power adapter/connection cable and reconnect again
after 2 minutes.
No sound
on phono
source
• Ensure the turntable is on the correct source.
• The protective needle cover was not removed. Remove it.
• The tie-wrap was not removed from underneath the tone arm.
Remove it.
• Unlock the Screw Lock using a screwdriver.
• The Tone Arm Hold Down Clip was not released. Release it.
Poor sound
on phono
source
• The stylus is dirty. Remove dust on the stylus with a stylus cleaning
brush.
• Dust or dirt has collected on the record. Clean the record with a good-
quality record cleaner.
No sound
on USB
source
• Ensure the turntable is on the correct source.
• Ensure the USB file is MP3 format.
• Remove the USB memory stick and reconnect again.
No/Poor
sound on
radio source
• Ensure the turntable is on the correct source.
• Radio signal is too weak. Move the turntable to another place or
extend the wire antenna.
No/Poor
sound on
CD source
• Ensure the turntable is on the correct source.
• Make sure the disc printing is face up.
• Make sure the disc is CD format or MP3 format.
• The disc is dirty. Clean the disc and play again.
No/Poor
sound on
cassette
• Ensure the turntable is on the correct source.
• Remove the cassette tape and reinsert it with the opposite side facing
up.
• The cassette tape is broken. Insert a new tape.
No sound
on Aux
mode
• Ensure the turntable is on the correct source.
• Check that all devices are powered on.
• Check that the volume level on the external device is not turned to a
minimum.
• Check that the correct source is playing on the external device.
• Remove the audio cable and reconnect again.
No
recording
• Ensure the turntable is on the correct source.
• Ensure the USB is correctly connected.
• USB memory is full. Insert a new USB storage device.
• Remove the USB storage device and reconnect again.
