1byone 436NA-0006, Instruction Manual, Page: 7 / 36

EN
DE
FR
ES
IT
EN
DE
FR
ES
IT
10
11
Inserting Batteries
1 2
3
1. Remove the battery compartment cover on
the back of the remote control. 2. Insert two AAA batteries ( not included) into
the battery compartment, paying attention to
the correct polarity.
3. Reinsert the battery cover.
Notes:
• The remote control works within a distance of about 8 meters and with a sensor angle of about 30 degrees from left to right.
• Remove the battery if you do not intend to use the remote control for a long period of time.
• Weak batteries can leak and severely damage the remote control.
• Batteries must not be exposed to excessive heat sources, such as sunshine or fire.
• Please be environmentally friendly and dispose of batteries according to local government regulations.
Operating Instructions
• Press to switch on the soundbar speaker. Press again to
put the speaker in standby mode. Press again to turn off the
speaker.
USB
• Enter USB mode
BT
• Enter BT (Bluetooth) mode
OPT
• Enter Optical In mode
ARC
• Enter ARC mode
LINE
AUX
• Switch between Line In and Aux In mode
• Pause/Resume a playback
• Hold down for 3 seconds to disconnect Bluetooth
(only available for Bluetooth or USB mode)
• Skip to the next track
(only available for Bluetooth or USB mode)
• Return to the previous track
(only available for Bluetooth or USB mode)
MUTE
• Temporarily switch off the sound. Press again to switch the sound
back on
• Turn up the volume • Turn down the volume