Safety information
Before you get started
The 1&1 HomeServer does not have an on/off switch. As such,
it must be possible to unplug the 1&1 HomeServer at all times.
Plug the 1&1 HomeServer into an easily accessible power
socket.
Overloaded sockets, extension cables and multiple socket
outlets can cause fires and electrocution. Avoid the use of
extension cables and multiple socket outlets wherever possible.
Do not connect several extension cables or multiple socket
outlets together.
Heat build-ups can lead to the 1&1 HomeServer overheating.
This could damage the 1&1 HomeServer. Ensure there is
sufficient air circulation around the 1&1 HomeServer. Ensure
that the ventilation slots on the housing of the 1&1 HomeServer
remain unobstructed. Do not place the 1&1 HomeServer on
rugs, carpets or upholstered furniture. Do not cover the 1&1
HomeServer.
The underside of the 1&1 HomeServer may become warm
during normal operation. This heat may cause damage to
heat-sensitive surfaces. Do not place the 1&1 HomeServer on
heat-sensitive surfaces.
In the case of storms, there is a risk of lightning strike, which
could lead to surge damages to connected electronic devices.
Do not install the 1&1 HomeServer during a storm. In the case
of storms, unplug the 1&1 HomeServer from the mains socket
and from the DSL or VDSLconnection.
If moisture or liquid reaches the 1&1 HomeServer, it could
lead to electric shocks or short circuits. Only ever use the 1&1
HomeServer inside buildings. Do not allow any liquids to get
inside the 1&1 HomeServer.
There is a risk to users if the 1&1 HomeServer is opened incor-
rectly or if improper repairs are carried out. Do not open the
housing of the 1&1 HomeServer. If repairs are needed, return
the 1&1 HomeServer to 1&1.
Dust, moisture and steam, as well as strong detergents or
solvents, can damage the 1&1 HomeServer. Protect the 1&1
HomeServer from dust, moisture and steam. Always unplug the
1&1 HomeServer before cleaning. Clean the 1&1 HomeServer
with a damp, lint-free cloth.
Do not use the 1&1 HomeServer in areas where the use of
wireless equipment is forbidden. Follow the relevant signs or
instructions from authorised personnel.
During installation and operation of the 1&1 HomeServer, ensu-
re that people maintain a distance of at least 20 cm.
Do not install or operate your 1&1 HomeServer near flammable
gases or in areas where there is a risk of explosion.
4
